Our UVC decontamination device consists of two mobile units equipped with a UVC tube protected by Quartz. Used in addition to your disinfection protocol, the UVcare 344 is the best germicidal and anti-Covid treatment for your medical practice, your hair salon, your meeting room.
Compact, mobile, powerful, fast, and safe, the UVcare 344 guarantees 99.99% decontamination of air, surfaces and floors. An optimal result that UVC air purifiers cannot
This solution, suitable for all work areas, includes:
- 1 UVMaster172w;
- 1 UVSlave172w;
- 1 application (app);
- 1 patient information pack.
Its speed of operation guarantees the treatment of your closed spaces in a few minutes. From now on, you are no longer obliged to ventilate (by opening the windows) the room in which you work for long minutes between each session/consultation.
As an indication, a 3-minute session is enough to sanitize a 4m x 4m dental office. For larger
surfaces, we are at your disposal to define together a tailor-made solution.
UVcare172-MP Portable solution for vehicules
In this version, the germicidal lamp is not fixed to the stand. It is a removable element, connected to the stand by a 4-meter electrical cable. Disinfection can thus be carried out in a small space where the entire stand would not fit, for example inside a vehicle. The lamp cable is connected to a dedicated connector that takes the place of the connector of the Slave Stand in the standard version. Thus, in the context of the remote lamp, the Slave Stand is not applicable. For moving and storing the device, the lamp is housed in a vertical Plexiglas sleeve attached to the metal case of the stand. It should be noted that the plexiglass is opaque to the UV-C rays, so that the surrounding personnel is protected if the germicidal lamp were inopportunely lit when it is stored in its sleeve. The lamp is equipped with elastic loops at both ends so that it can be attached to the structural elements of the room to be disinfected. The lamp can be placed horizontally or vertically, depending on the geometry of the environment. To ease the installation, the unit comes with two adjustable length suspension cords.
UVcare144-B Hand lamp
In this version, the germicidal lamp is not fixed to the stand. It is a removable element, connected to the stand by an electric cable of 4 meters. The disinfection can thus be carried out in a narrow space where the whole stand could not take place, for example inside a vehicle. The lamp cable is connected to a dedicated connector that takes the place of the connector of the Slave Stand in the standard version. Thus, in the context of the hand lamp, the Slave Stand is not applicable. The lamp is equipped with two 72W tubes; housed in a support with a deflector, equipped with a protective grid for the lamps. UVC lamps can easily absorb liquids and damage the unit. Any oil or other absorbent liquid or other substance must NOT touch the emission side of the unit and the UV lamps. Do not apply pressure to the UV tubes.
UVM – AirCom 150
The UVM-AirCom 150 is a powerful and silent UV-C device for disinfecting air contaminated with micro-organisms and viruses such as SARS-CoV-2. The contaminated air is continuously extracted by a
ventilator at the base of the device and disinfected without any chemical additives in the protected chamber.
The pathogenic elements are immediately eliminated and destroyed by UV-C. The disinfected air is blown back into the room.
Continuous disinfection reduces the risk of infection by infectious
pathogens in aerosols such as viruses, bacteria and molds.
UBM – HVAC
UVMastercare is available with a downloadable application on Apple store or Play store. The app allows you to control the UVMastercare and access its journal. Once connected, you will be able to:
- Name the device
- Enter the name of the operator
- Enter the name or reference of the disinfected area
- Change the sensitivity of the motion sensors
- Adjust the intensity of the sound signal
- Choose the duration of the countdown before start-up
- Generate a journal
A tried and tested technology
How to use the UVMasterCare solution?
After the departure of your patient, you carry out the routine surface disinfection: seat, operating light, spittoon, and instrument block before completely clearing the work surfaces.
You move the UVMaster172 close to the chair and the UVSlave172 diagonally to the seat.
After connecting the UVSlave172 to the UVMaster172 with a special cable, you connect the UVMaster172 to a conventional power outlet. Check that the devices are powered.
You turn the ignition key to power the device (green light). If you are ready to leave the room, force the key to the right. The timer will start with a beep (one beep per second) and you have 20 seconds to leave the room.
Switching on and disinfection
If the presence detectors of the slave and the master do not detect any movement in the room, the UV lights are switched on successively. The treatment is started for the programmed time. The motion detectors are activated. If an intrusion is detected, both devices are immediately switched off. You are directly informed via the remote control which emits an audible alert.
The application allows you to follow the progress of the disinfection in real time and to access several types of useful information for protocol management:
- Machine identity
- Identity of the operator
- Place of disinfection
- Duration of disinfection
- Remaining percentage of lamp life
End of the operation
During the treatment, you are informed of the progress of the disinfection phase by the application and/or the intelligent door light. This light is also equipped with a red signal light that can be affixed to the door or doorframe to prevent access to the practice. This light can also be used to interrupt the treatment at any time.
If you did not find answer in the FAQ
Do not hesitate to contact us.